tr
Ürünler
MakinaKesici Takımlar ve Ölçü AletleriHırdavat NalburiyeHidrolik PnömatikEndüstriyel YağlarKompresörForkliftRobotics
Ürünler
VERTICAL - CNV - CNV-550
Özellikler
Bilgi Formu
Foto Galeri
Video Galeri
Adı:
VERTICAL - CNV
Modeli:
CNV-550
Markası:
CAMPRO
Özellikler
Adı:
VERTICAL - CNV
Modeli:
CNV-550
Markası:
CAMPRO
Campro CNV Series is designed for economy and efficiency.
- The cast iron construction was designed using "Finite Element Analysis (FEA) and Advanced 3D Software and is extremely rigid and provides extremely accurate machining capabilities as well as high metal removal rates.
- The CNV series was ergonomically designed from the movable control panel to chip disposal and many other design features to reduce operator fatigue and increase working efficiency.
- Liner guideways on all three axes provide high speed yet rigid machining capabilities for a wide range of maching requirements from small lot size to mass prouduction for the automotive industry.
- All axes are equipped with direct drive servo motor with coupling.
- The Z-axis uses a servo motor brake instead of a counterbalance which provides superior surface finishes and accuracy.
| CONTENT | MODEL | CNV-550 |
|---|---|---|
| TRAVEL | ||
| X axis travel | mm | 550 (21.6") |
| Y axis travel | mm | 430 (16.9") |
| Z axis travel | mm | 480 (18.8") |
| Spindle nose to table surface | mm | 100~580 (39"~22.8") |
| Spindle center to column surface | mm | 485 (19") |
| TABLE | ||
| Table dimension | mm | 650 x 430 (25.5" x 16.9" ) |
| Max. loading weight | kg | 300 (661) |
| SPINDLE | ||
| Spindle motor | kw | 7.5 / 11 (15HP) |
| Spindle speed | rpm | 8,000 (10,000 / 12,000 / 15,000) |
| Spindle taper | type | 7 / 24 taper No.40 |
| AUTOMATIC TOOL CHANGER | ||
| No. of tools | - | 20 (16T) |
| Max. tool weight | kg | 7 (15) |
| Max. tool length | mm | 250 (9.8") |
| Max. tool diameter | mm | Ø80 (3.1") |
| Tool diameter (Adjacent empty) | mm | Ø130 (5.1") |
| Tool change time (Tool to Tool) | sec. | 2.5 |
| Tool change time (Chip to Chip) | sec. | 7 |
| FEEDRATE | ||
| Rapid feedrate (X/Y/Z) | m/min | 30 / 30 / 30 (1,181.1 / 1,181.1 / 1,181.1) |
| Cutting feedrate | m/min | 10,000 (393.7 ipm) |
| OTHER | ||
| Floor plan (W×D) | mm | 2,240 x 2,670 (88" x 105") |
| Machine weight | kg | 3,000 (6,613) |
| Max. machine hight | mm | 2,520 (99") |
| Power capacity | KVA | 15 |
| Air pressure source | kg/cm2 | 6~8 (85~113) |
CAMPO reserves the right to modify the specifications without further notice.
| Standard accessories | |
|---|---|
| 8,000 rpm belt type spindle | Rigid tapping |
| Spindle air blast system | Pre-tensioned ballscrews on 3 axes |
| Telescopic covers on 3 axes | Pneumatic system |
| Automatic lubrication system | Heat exchanger for electrical cabinet |
| Optional accessories | |
|---|---|
| 10,000 rpm / 12,000 rpm belt type spindle | 10,000 rpm / 12,000 rpm / 15,000 rpm I.D.D spindle |
| Spindle oil cooler | Chip screw conveyor |
| Chain type chip conveyor | Coolant through spindle |
| Deep hole adaptor | Coolant flushing device |
| High pressure coolant pump | Linear scales |
| CNC rotary table | Automatic tool length measurement |
| Workpiece measurement | ATC cover |
| Fully rear cover | Air condition |
| CE modification | Transformer |
Bilgi Formu
Foto Galeri
Video Galeri