tr
Ürünler
MakinaKesici Takımlar ve Ölçü AletleriHırdavat NalburiyeHidrolik PnömatikEndüstriyel YağlarKompresörForkliftRobotics
Ürünler
TURNING & MILLING - CPLMC - CPL-30MC
Özellikler
Bilgi Formu
Foto Galeri
Video Galeri
Adı:
TURNING & MILLING - CPLMC
Modeli:
CPL-30MC
Markası:
CAMPRO
Özellikler
Adı:
TURNING & MILLING - CPLMC
Modeli:
CPL-30MC
Markası:
CAMPRO
- Powerful AC spindle motor drive and finned headstock construction for excellent heat dissipation. High torque output combined with constant circumferential speed ensures optimal cutting performance, extra fine and accurate machined surface which greatly increase tool life.
- VDI Turret: Provide extremely accurate positioning and low noise.Offer a quick change tooling solution and short cycle time.Quick-change clamping method which performs within seconds.High degree of stability due to high locking forces. Connect with centralized lubrication system to ensure high service and usage life.
- BMT Turret: Provide superior rigidity for forward and reverse machining.Drive with servo motor for very fast bidirectional swivel.Heavy loads of stability due to high locking forces.Hydraulic locking with special tripe generating crown gear.Low kinetic energy of the indexing drive.Fastening snap-ring groove for the tool disk..
| CONTENT | MODEL | CPL-30MC |
|---|---|---|
| TRAVEL | ||
| X axis travel | mm | 200 + 5 |
| Z axis travel | mm | 678 |
| CAPACITY | ||
| Max. swing over bed | mm | 570 |
| Max. swing over carriage | mm | 335 |
| Distance between centers | mm | 810 |
| Standard turning diameter | mm | 162 |
| Max. turning diameter | mm | 260 |
| Max. turning length | mm | 678 |
| SPINDLE | ||
| Spindle motor | kw | 15 / 18.5 |
| Spindle speed | rpm | 3,000 |
| Spindle nose | type | A2-8 |
| Spindle bearing diameter | mm | Ø130 |
| Hydraulic chuck (OPT.) | inch | 10" (12") |
| Hole through draw tube | mm | Ø75 |
| Indexing of C-axis | 0.001 | |
| TURRET | ||
| Turret type | type | 12 Servo |
| O.D. / I.D. | mm | VDI-40 |
| Tool change time | sec. | 0.2 |
| Servo motor | kw | 3.7 / 5.5 |
| Max. tool speed | rpm | 5,000 |
| TAILSTOCK | ||
| Quill diameter | mm | Ø80 |
| Quill travel | mm | 120 |
| Quill Taper | type | MT-#4 |
| FEEDRATE | ||
| Rapid feedrate (X/Z) | m/min | 24 / 24 |
| OTHER | ||
| Floor plan (W×D) | mm | 3,875 × 1,785 |
| Machine weight | kg | 5,500 |
| Power capacity | KVA | 30 |
| Coolant tank capacity | L | 110 |
CAMPO reserves the right to modify the specifications without further notice.
Bilgi Formu
Foto Galeri
Video Galeri