tr
Ürünler
MakinaKesici Takımlar ve Ölçü AletleriHırdavat NalburiyeHidrolik PnömatikEndüstriyel YağlarKompresörForkliftRobotics
Ürünler
Super Multitasking Machine with ATC - NTRX-300
Özellikler
Bilgi Formu
Foto Galeri
Video Galeri
Adı:
Super Multitasking Machine with ATC
Modeli:
NTRX-300
Markası:
NAKAMURA-TOME
Özellikler
Adı:
Super Multitasking Machine with ATC
Modeli:
NTRX-300
Markası:
NAKAMURA-TOME
- X and Y axis travel ensure a wide machining range. X-axis travel 125mm below spindle center ensures a wider machining range.
- Highly Rigid Design. All units are located on the main frame vertically for high rigidity
- Operator friendly design. Spindle center is easy to reach, thanks to 450mm distance from the machine front and 1100mm height from the floor.
- New operation panel with NT Smart X featuring. Operation Level Management,Camera,Voice Guidance,Production Management and 3D collision check, all included as standard.
- Modular design. Choose from R-spindle type or tailstock type
| R-spindle Specification | |
|---|---|
| Capacity | |
| Max.turning diameter / Max.turning length | 640mm/1,150mm |
| Distance between spindles | max.1,350mm/min.250mm |
| Bar capacity | 65mm(op.Φ71,Φ80,Φ90) |
| Chuck size | 254mm（10"） |
| Axis travel | |
| Slide travel (X1/Z1/B2) | 700mm/1125mm/1100mm/250mm |
| B-axis positioning range | 225°（-120°、+105°） |
| Left Spindle | |
| Spindle speed | 4,500min-1 |
| Spindle motor | 15/11kW (op.22/18.5kW) |
| ATC | |
| ATC Number of tools | 40 （op.60,80,120） |
| Tool spindle | |
| Tool spindle speed | 8,000min-1 （op.12,000min-1） |
| Tool spindle motor | 18.5/11ｋW |
| Tool shank type | HSK-A63 （op.CAPT C6） |
| Right spindle | |
| Spindle speed | 4,500min-1 |
| Spindle motor | 15/11kW (op.22/18.5kW) |
| General | |
| Floor space（LxWxH） Included chip tank | 4,529mmｘ2,670mmｘ2､610mm |
| Tailstock Specification | |
|---|---|
| Capacity | |
| Max.turning diameter / Max.turning length | 640mm/1,150mm |
| Distance between spindles | max.1,350mm/min.250mm |
| Bar capacity | 65mm (op.Φ71,Φ80,Φ90) |
| Chuck size | 254mm（10"） |
| Axis travel | |
| Slide travel (X1/Z1/B2) | 700mm/1125mm/1100mm/250mm |
| B-axis positioning range | 225°（-120°、+105°） |
| Left Spindle | |
| Spindle speed | 4,500min-1 |
| Spindle motor | 15/11kW (op.22/18.5kW) |
| ATC | |
| ATC Number of tools | 40本 （op.60,80,120本） |
| Tool spindle | |
| Tool spindle speed | 8,000min-1 （op.12,000min-1） |
| Tool spindle motor | 18.5/11ｋW |
| Tool shank type | HSK-A63（op.CAPT C6） |
| Tailstock | |
| Driving Methods | NC control servo driven |
| Tailstock postioning stroke | 1100mm |
| Rapid feed rate | 8000mm/min |
| Tailstock spindle taper size | MT-5 |
| General | |
| Floor space（LxWxH） Included chip tank | 4,529mmｘ2,670mmｘ2､610mm |
Bilgi Formu
Foto Galeri
Video Galeri