en
Products
MachineCutting Tools and MeasuringHardware StoreHydraulic PneumaticIndustrial OilsCompressorForkliftRobotics
Products
TURNING & MILLING - CPLMC - CPL-30MC
Description
Order Form
Photo Gallery
Video Gallery
Name:
TURNING & MILLING - CPLMC
Model:
CPL-30MC
Brand:
CAMPRO
Description
Name:
TURNING & MILLING - CPLMC
Model:
CPL-30MC
Brand:
CAMPRO
- Powerful AC spindle motor drive and finned headstock construction for excellent heat dissipation. High torque output combined with constant circumferential speed ensures optimal cutting performance, extra fine and accurate machined surface which greatly increase tool life.
- VDI Turret: Provide extremely accurate positioning and low noise.Offer a quick change tooling solution and short cycle time.Quick-change clamping method which performs within seconds.High degree of stability due to high locking forces. Connect with centralized lubrication system to ensure high service and usage life.
- BMT Turret: Provide superior rigidity for forward and reverse machining.Drive with servo motor for very fast bidirectional swivel.Heavy loads of stability due to high locking forces.Hydraulic locking with special tripe generating crown gear.Low kinetic energy of the indexing drive.Fastening snap-ring groove for the tool disk..
| CONTENT | MODEL | CPL-30MC |
|---|---|---|
| TRAVEL | ||
| X axis travel | mm | 200 + 5 |
| Z axis travel | mm | 678 |
| CAPACITY | ||
| Max. swing over bed | mm | 570 |
| Max. swing over carriage | mm | 335 |
| Distance between centers | mm | 810 |
| Standard turning diameter | mm | 162 |
| Max. turning diameter | mm | 260 |
| Max. turning length | mm | 678 |
| SPINDLE | ||
| Spindle motor | kw | 15 / 18.5 |
| Spindle speed | rpm | 3,000 |
| Spindle nose | type | A2-8 |
| Spindle bearing diameter | mm | Ø130 |
| Hydraulic chuck (OPT.) | inch | 10" (12") |
| Hole through draw tube | mm | Ø75 |
| Indexing of C-axis | 0.001 | |
| TURRET | ||
| Turret type | type | 12 Servo |
| O.D. / I.D. | mm | VDI-40 |
| Tool change time | sec. | 0.2 |
| Servo motor | kw | 3.7 / 5.5 |
| Max. tool speed | rpm | 5,000 |
| TAILSTOCK | ||
| Quill diameter | mm | Ø80 |
| Quill travel | mm | 120 |
| Quill Taper | type | MT-#4 |
| FEEDRATE | ||
| Rapid feedrate (X/Z) | m/min | 24 / 24 |
| OTHER | ||
| Floor plan (W×D) | mm | 3,875 × 1,785 |
| Machine weight | kg | 5,500 |
| Power capacity | KVA | 30 |
| Coolant tank capacity | L | 110 |
CAMPO reserves the right to modify the specifications without further notice.
Order Form
Photo Gallery
Video Gallery